View previous topic :: View next topic |
Author |
Message |
DenHaag E, Gold
![](http://i1137.photobucket.com/albums/n501/paulhague/hillclimb-1.jpg)
Joined: 24 Aug 2008 Posts: 3078 Location: Northumberland
|
Posted: Fri Feb 10, 2012 6:11 pm Post subject: Replacing mindset with standard integrated headset |
|
|
The headset on me Specialized E5 frame needs replacing.
The original Specialized outer races look like standard integrated ones, but with an additional section to make them a press fit into the frame headtube. This means a standard crane creek type race will just drop in.
So, question is: will just using the standard push fit race be OK. Do I need to worry that Specialized felt the need to make it a press fit.
I've done a dry assembly, adjusted & tightened up. It feels very smooth.
I could always use some Loctite stud & bearing fit to be sure, but obviously, would prefer not to.
Cheers.
Last edited by DenHaag on Fri Feb 10, 2012 11:54 pm; edited 1 time in total |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
mattr World Champ
Joined: 16 Apr 2004 Posts: 12647
|
Posted: Fri Feb 10, 2012 6:15 pm Post subject: |
|
|
if they are tapered seats and a fairly smooth fit it should be fine. Compare how much the bearing moves with the *CENSORED* one you took out.
Alternatively, do a bit of digging and see what the headset standard is for that frame, all the manufacturers have pulled together a complete set of standards, some of their homepages have a headset selector. This might help. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DenHaag E, Gold
![](http://i1137.photobucket.com/albums/n501/paulhague/hillclimb-1.jpg)
Joined: 24 Aug 2008 Posts: 3078 Location: Northumberland
|
Posted: Fri Feb 10, 2012 6:28 pm Post subject: |
|
|
The pro-lite one I'm trying is the standard crane creek style which appears to match the one listed on the crane creek site. Do you think the press fit was "belt & braces"? Maybe to make sure the frame isn't damaged if the bearings seize or summert...
Seems an odd thing to do - The taper would normally lets it find its natural postion, but it might as well not be there the way they've done it - a step in diameter is all that's needed
It's the later version of the E5 S-Works (longer headtube). I can't remember if the original version had this. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DenHaag E, Gold
![](http://i1137.photobucket.com/albums/n501/paulhague/hillclimb-1.jpg)
Joined: 24 Aug 2008 Posts: 3078 Location: Northumberland
|
Posted: Sun Feb 12, 2012 5:18 pm Post subject: |
|
|
Oh well, I'll just build it up with a standard IS41 headset and keep an eye on it. Hopefully I won't end up with a worn headtube! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Chrissylaa E, Gold
Joined: 17 Apr 2009 Posts: 3382 Location: On a hillside desolate.
|
Posted: Sun Feb 12, 2012 6:22 pm Post subject: |
|
|
DenHaag wrote: |
Oh well, I'll just build it up with a standard IS41 headset and keep an eye on it. Hopefully I won't end up with a worn headtube! |
I had this frameset and a standard integrated is ok.
I also used Cane Creek(the one with a tall top cap),IS 2 i believe. _________________ And the senses being dulled are mine. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
DenHaag E, Gold
![](http://i1137.photobucket.com/albums/n501/paulhague/hillclimb-1.jpg)
Joined: 24 Aug 2008 Posts: 3078 Location: Northumberland
|
Posted: Sun Feb 12, 2012 11:00 pm Post subject: |
|
|
Chrissylaa wrote: |
DenHaag wrote: |
Oh well, I'll just build it up with a standard IS41 headset and keep an eye on it. Hopefully I won't end up with a worn headtube! |
I had this frameset and a standard integrated is ok.
I also used Cane Creek(the one with a tall top cap),IS 2 i believe. |
Ta. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
Important Notice: VeloRiders copyrights all images appearing
on this website and in the Gallery. Images are displayed for viewing only,
and commercial or personal use of any of these images without the written
permission of VeloRiders is prohibited under international copyright law.
Copyright 2002/2013 VeloRiders. All rights reserved.
Powered by phpBB
© 2001, 2002 phpBB Group
E-mail VeloRiders. Comments, questions or send your photos
to , Order your photos@